Displaying 10 out of 60 suppliers
Verification
Supplier specification
Ballast Water Test Kits Suppliers
Port State Control and flag inspectors pay close attention to ballast water treatment today, and a noticeable share of systems still struggle with D-2 performance checks in service. Inspectors increasingly want evidence that the ballast water treatment system is delivering water that meets the D-2 performance standard in real operating conditions. At the same time, owners and service companies need a practical way to check system performance after commissioning, after repairs, or when voyage routes change.
Ballast water test kits and reagents fill that gap. Instead of sending every sample ashore, crews can take indicative measurements on board: checking whether treated ballast still contains too many organisms, whether indicator bacteria are under control, and whether residual oxidant or biocide levels are within limits. Ballast water test kits suppliers support this by packaging instruments, sampling tools and reagents into ship-friendly solutions that match all requirements.
Types of Ballast Water Test Kits and Indicative Devices
Most ballast water test solutions are designed to support onboard checks, not full laboratory analysis. Ballast water test kits manufacturers organize their offer into a few practical categories:
- All-in-one ballast water test kits -These are suitcases designed for on board use. A typical kit combines microbiological tests for indicator bacteria, tools to capture and examine organisms, a small incubator, a UV lamp and a salinity meter or refractometer. Some versions also include a handheld colorimeter for measuring residual oxidant. The aim is to let crew or riding teams run through a full basic check without specialized lab equipment.
- Portable indicative devices - Fluorometer-based meters look for signals from living phytoplankton; ATP-based instruments estimate the amount of living biomass in the sample. Many units are pre-configured around D-2 limits, giving an immediate indication of whether the water is likely to pass or fail a detailed examination. These are widely used for commissioning follow-up, spot checks during service, and by inspectors as a first screening tool.
- Reagents and consumables - Behind every test kit sits a steady flow of consumables: growth media, nutrient pads, filters, sampling bottles, DPD tablets and liquids for TRO (Total Residual Oxidant) and chlorine measurements, as well as calibration standards for meters. Test kits & reagents suppliers help operators keep these items in date and in stock so the equipment is ready when an inspection or internal audit comes around.
Used together, these tools let owners move from one-off commissioning tests to continuous oversight of ballast water treatment performance throughout the ship’s life.
Sourcing Ballast Water Test Kits and Reagents Through Records Marine
For fleet managers and superintendents, the challenge is finding test kits and reagents suppliers that can support their BWTS types, sampling routines and voyage areas. Records Marine simplifies this by bringing together ballast water test kits distributors in one place. On our platform, you can find the companies focused on complete D-2 test kits, distributors for specific indicative devices, and vendors who can supply replacement reagents and consumables in your usual ports.
As soon as you apply smart filters available on Records Marine, you can narrow the results down to a shortlist of partners that fit your technical needs and logistics. From there, it becomes easier to open direct discussions about kit configurations, restocking intervals, and support during commissioning, routine self-checks and PSC campaigns, so ballast water testing becomes a planned part of your wider compliance strategy rather than a last-minute exercise.
Year Founded: 1987
